Design & Reuse
arrow Arithmetic & Mathematic (44)
arrow Embedded Memories (1004)
arrow I/O Library (983)
arrow Standard cell (745)
983 IP
101
2.0
2.5V 100MHz Oscillator Staggered I/O Pad Set
The OSx_BI_032_12V oscillator is designed to generate an asynchronous on-chip clock signal with an appropriate external oscillator crystal. The design...
102
2.0
2.5V Wide-Range General Purpose I/O Pad Set
The 2.5V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
103
2.0
2.5V Wide-Range General Purpose I/O Pad Set
The 2.5V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
104
2.0
1.8V Fault Tolerant General Purpose I/O Inline Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
105
2.0
1.8V Fault Tolerant General Purpose I/O Staggered Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
106
2.0
1.8V General Purpose I/O Staggered Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
107
2.0
1.8V General Purpose I/O Staggered Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
108
2.0
1.8V 3.3V Tolerant General Purpose IO
The 1.8V GPIO 3VT library provides general purpose bidirectional I/O cells that are both fault tolerant and 3.3V tolerant. These programmable, multi-v...
109
2.0
1.8V General Purpose I/O Inline Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
110
2.0
1.8V General Purpose I/O Inline Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
111
2.0
1.8V General Purpose I/O Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
112
2.0
1.8V General Purpose I/O Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
113
2.0
1.8V General Purpose I/O Staggered Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
114
2.0
1.8V General Purpose Inline I/O Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
115
2.0
1.8V General Purpose Staggered I/O Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
116
2.0
1.8V GPIO: 3.3V Tolerant
The 1.8V Fault-Tolerant General Purpose I/O library provides a 3.3V tolerant programmable, bidirectional I/O that give the system designer the flexibi...
117
2.0
1.8V Power Support I/O Pad Set
The 1.8V Support: Power library provides a full complement of cells to support the assembly of a complete pad ring by abutment. It is supplied as a st...
118
2.0
1.8V Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides a programmable oscillator for on-chip asynchronous clock generation with an appropriate external crystal. This oscil...
119
2.0
1.8V Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides a programmable oscillator for on-chip asynchronous clock generation with an appropriate external crystal. This oscil...
120
2.0
1.8V Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides oscillators for on-chip asynchronous clock generation with an appropriate external crystal. This library is offered ...
121
2.0
I2C I/O Pad Set
The I2C libraries provide the bidirectional I/O for two-line serial communication per Rev. 4 of the I2Cbus industry specification. The design is compa...
122
2.0
I2C I/O Pad Set
The I2C library provides open-drain bi-directional I/O cells designed for the I2C two-line interface. It is compliant with the I2C-bus specification –...
123
2.0
I2C I/O Pad Set
The I2C libraries provide the bidirectional I/O for two-line serial communication per Rev. 4 of the I2Cbus industry specification. The design is compa...
124
2.0
I2C IO Pad Set
The I2C library provides open-drain bi-directional I/O cells designed for the I2C two-line interface. It is compliant with the I2C-bus specification –...
125
2.0
I2C IO Pad Set
The I2C library provides the bidirectional I/O for two-line serial communication per Rev. 4 of the I2C-bus industry specification. The design is comp...
126
2.0
I2C IO Pad Set
...
127
2.0
I3C I/O Library
The I3C library provides a bi-directional I/O driver designed for the I3C two-line interface. It is compliant with the MIPI Specification for I3C –Ver...
128
2.0
ICC I/O Pad Set
The ICC library provides the bidirectional reset, clock, and data I/O drivers for the smart card UICC terminal interface. This library has been desi...
129
2.0
PCI IO Pad Set
The PCI 3.0 library provides the driver / receiver and required support cells for PCI 3.0 signaling. The cells are compliant with the PCI Local Bus S...
130
2.0
SD 3.0 I/O Pad Set
The SD library provides the driver / receiver cell for SD 3.0 signaling. The library is compliant with the SD Specifications, Part 1, Physical Layer S...
131
2.0
SD 3.0 I/O Pad Set
The SD library provides the driver / receiver cell and required support cells for SD 3.0 signaling. Fault-tolerant operation. This library is offere...
132
2.0
DDR3 / DDR4 Combo I/O Pad Set
The DDR3 / DDR4 library includes the combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and a full compleme...
133
2.0
DDR3_DDR4 IO Pad Set
The DDR3 / DDR4 library includes the combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and a full compleme...
134
2.0
General-Purpose I/O (GPIO) - 1.5V-1.8V
The 1.8V General Purpose I/O libraries provide bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog powe...
135
2.0
General-Purpose I/O (GPIO) - 1.5V-1.8V
The 1.8V General Purpose I/O libraries provide bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog powe...
136
2.0
RF I/O Pad Set and Discrete RF ESD Protection Components
The RF libraries include analog signal pads and ESD protection components for RF applications. These libraries are offered as a supplement to the stan...
137
2.0
RF I/O Pad Set and Discrete RF ESD Protection Components
The RF library include analog signal pads and ESD protection components for RF applications. This library is offered as a supplement to the IO librar...
138
2.0
RGMII / GMII Combo I/O Pad Set
The (R)GMII libraries provide the combo driver / receiver and required support cells for (R)GMII signaling. The libraries are compliant with the Gigab...
139
2.0
RGMII IO Pad Set
The (R)GMII libraries provide the combo driver / receiver and required support cells for (R)GMII signaling. The libraries are compliant with the Giga...
140
2.0
RGMII IO Pad Set
The (R)GMII library provides the combo driver / receiver and required support cells for (R)GMII signaling. The libraries are compliant with the Gigabi...
141
2.0
RGMII IO Pad Set
The (R)GMII / SMII Combo library provides the driver / receiver cell for GMII, RGMII, and SMII signaling along with a full complement of I/O power, co...
142
2.0
CI Plus
The CI Plus library provides a programmable bi-directional I/O cell designed to meet the signal interface requirements of the Common Interface. This l...
143
2.0
High-Speed LVDS (SERDES) Transceiver
High-speed LVDS (SERDES) transceiver with up to 8 serial data lanes, generic data width and integrated asynchronous FIFO. Ideal for standard LVDS link...
144
2.0
SMBus IO Pad Set
The SMBus library provides open-drain bi-directional I/O cells designed for the High-Power SMBus two-line interface. It is compliant with the Rev 3.1 ...
145
2.0
CML I/O Pad Set
The CML library provides a differential clock driver, a voltage reference, and power cells to support REFCLK signaling for PCIe applications....
146
2.0
CML I/O Pad Set
The CML library provides a differential current mode logic clock driver to support REFCLK signaling in PCIe applications along with a CML voltage refe...
147
2.0
ONFI 4 IO Pad Set
The ONFI 4.0 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to suppor...
148
2.0
ONFI 4.1 I/O Pad Set
The ONFI 4.1 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to supp...
149
2.0
ONFI_3 IO Pad Set
The ONFI 3.0 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to suppor...
150
2.0
ONFI_3 IO Pad Set
The ONFI 3.0 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to suppor...